Shipping | drumjumper.com

Product Features

At around 275 lbs. the Drum Jumper is easily transported, going where Jumper Trucks can’t go.

Drum Jumper works on front and rear discharge mixers.

The Drum Jumper can pay for itself in one use.

Unlike a Ready Mix truck, the Drum Jumper is always available. There is no need to tie up a Jumper Truck and risk hydraulic contamination.

Drum Jumper is shipped with tie down straps, hydraulic fittings and rubber mat. Hydraulic oil and gas will be all you need!

Products LLC
Richard Willbee
1071 Donegan Rd. Lot 870
Largo, FL 33771
Email: rswillbee@gmail.com

Shipping Information:

Drum Jumpers are shipped with the following items:

2 - 6' Long mix and discharge hoses
1 - 6' Long return hose
2 - 1" Hose plugs
1 - 3/4" Hose plug
2 - Ratchet straps to secure the Drum Jumper to mixer fender
1 - Neoprene cushion
1 - 1" JIC union

Drum Jumpers are shipped with the following items:

**THE DRUM JUMPER IS SHIPPED WITHOUT HYDRAULIC OIL**

The Drum Jumper’s standard 6′ pressure hoses are cut to a length suitable for front discharge mixer operation. If you have rear discharge mixers you may need extension hoses. With the Drum Jumper near the rear of the truck on the mixer fender, the extension hoses must be long enough to reach your mixer hydraulic drive motor. It is recommended extension hoses are not to exceed 12′ in length. Extension hose kits are available from Drum Jumper Products LLC.

It is VERY IMPORTANT you inspect your mixer fleet and verify hose fitting sizes on the hydraulic drive motors. If you have sizes different than what is provided, you will need to get the proper adapters and add them to your Drum Jumper storage container.

"Owning a Drum Jumper™ AN ADVANTAGEOUS INVESTMENT AND DEFINITE INSURANCE STRATEGY!"